AMT MiniONE G-JET Dual ENFit Y-Port Extension Set is Compatible with the Mic-Key device but Non-compatible with MINI Classic Buttons.

Features

• Feed Sets are provided sterile.
• Helps the caregiver avoid waking the patient.
• This Extension Set can be used for bolus feeding.
• Feeding port and feedset connectors "Glow Green" in the dark.
• The latest innovation from AMT is to increase patient comfort while improving patient outcomes.

Feeding with Jejunal (Glow Green) Feed Set

• Attach the Jejunal feeding set by lining up the dark line on the feed set or venting set with the dark line on the Jejunal feeding port and rotate 3/4 clockwise to lock into place, until you meet resistance. Do not rotate any further, as you will cause damage to the AMT G-Jet.
• The feeding set needs to be cleaned after each use by rinsing with mild soapy water and then re-rinsing thoroughly with water.
• After washing, allow them to air dry.
• The feeding set can be used for up to 2 weeks, provided they are adequately cleaned in between usage (follow directions as per local guidelines). Continuous feeds into the Jejunum must be given via a pump; the tube must be flushed at least 3 times a day to prevent any blockage.
• If feeds are being given, the tube must be flushed before and after feeds to prevent blocking.
• The patient should ideally be positioned at a minimum of 30 degrees for feeds.

What is ENFit?
The International Organization for Standardization (ISO) has created a new standard design for enteral connectors, termed the "ENFit Connector." These new ENFit Connectors are intended to improve patient safety and decrease the risk of medical device misconnections. This new connector has been designed to be incompatible with Luer adapters, which are commonly used in IV applications. The ENFit connector will look & secure very similar to a Luer threaded lock system, although the design is larger and thus, incompatible with Luers.