Cook Medical Chait Access Adapter with Connecting Tube

Cook Medical Chait Access Adapter with Connecting Tube is designed to provide a secure and convenient connection between the Chait Cecostomy Catheter and the delivery tubing of an irrigation or enema bag system. This adapter ensures smooth and consistent flow during bowel management procedures, offering a dependable interface that simplifies setup and use.

Features:

• Secure Connection: Enables a stable link between the Chait Cecostomy Catheter and irrigation or enema delivery tubing.
• Reusable Design: Intended for single-patient reuse, supporting both safety and cost efficiency.
• Durable Construction: Features a flared fitting on one end and a metal cannula joined to a plastic block for strength and reliability.
• Smooth Flow Control: Promotes uninterrupted fluid transfer for effective bowel management.
• Easy Handling: Designed for straightforward attachment and detachment during routine irrigation procedures.

Intended Use:

The Chait Access Adapter is intended to allow connection between the Chait Cecostomy Catheter and the delivery tubing of an irrigation/enema bag system.

Precautions:

• The Chait Access Adapter should only be used in patients who have a Chait Cecostomy Catheter in place.
• The potential effects of phthalates on pregnant/nursing women or children have not been fully characterized and there may be concern for reproductive and developmental effects.

Instructions For Use:

1. Prepare the irrigation/enema solution according to healthcare provider recommendations
2. Fill the irrigation/enema delivery system with prepared solution, leaving delivery tubing clamped.
3. Connect the flared fitting of the Chait Access Adapter to the irrigation/ enema delivery system tubing.
4. Open the clamp on the delivery system tubing and fill the tubing and adapter with prepared solution.
5. Close the clamp on the delivery system tubing.
6. Open the Chait trapdoor mechanism.
7. Connect the Chait Access Adapter to the open Chait trapdoor.
8. Insert the metal cannula of the adapter into the lumen of the catheter and align the hole in the plastic block with the pin in the trapdoor cover.
9. Advance the adapter until the pin and cannula are fully seated.
10. Open the clamp and allow irrigation/enema solution to flow through the Chait catheter into the bowel.
11. Once irrigation/enema is complete, disconnect the irrigation/enema set and Chait Access Adapter from the Chait catheter.
12. Close the Chait catheter trapdoor fitting.
13. Clean the Chait Access Adapter and the irrigation/enema set with a solution of warm soapy water, rinse until no soap remains, and allow to dry before storing.
14. Store the Chait Access Adapter at room temperature in a clean, dry location.

Other Information:

• Supplied in individual peel-open packages sterilized by ethylene oxide gas.
• Intended for single patient use.
• Upon removal from package, inspect the product to ensure no damage has occurred.
• Product may be cleaned and re-used for a single patient.