MIC-KEY Over The Wire Stoma Measuring Device assists in determining proper feeding tube shaft length to ensure patient comfort and safety. Considering its use, the stoma measuring device is considered an important component, the proper use of which is very necessary. This single-use device is free from natural rubber latex to eliminate the possible occurrence of allergic reactions.

Features

• Sterile.
• Single use.
• Individually Packaged.
• Natural rubber latex-free.

Using MIC-KEY Stoma Measuring Device in 10 Steps

1. Moisten the tip of the Stoma Measuring Device with a water-soluble lubricant or water.
2. Confirm that the pre-attached plug is firmly seated into the top of the lumen. Insert the device through the stoma site into the stomach. DO NOT USE FORCE.
   Note: 0.038" guidewire may be used to facilitate placement by removing the plug.
3. Inflate the balloon with 5 ml water or saline.
4. Gently pull the Stoma Measuring Device away from the patient until you feel resistance against the abdominal wall.
5. With the patient in a supine position, slide the plastic disk down to the stoma.
6. Read the marking at the top of the disk. The added 1 mm to 2 mm to the actual stoma length allows some movement for a proper fit. The accuracy of this device is ±0.125 cm.
7. Slide the disk up away from the stoma and raise the patient to an upright position. Slide the disk down to the stoma.
8. Read the marking at the top of the disk.
9. Record the average of the two-centimeter readings.
10. Deflate the balloon and remove the device.