Zomee Fit Double Hands-Free Wearable Breast Pump is quiet enough (under 48 dB) to wear during your busy life for a discrete milk collection. Each pump includes a soft silicone breast shield and two sizes of inserts for a more comfortable pumping experience. Each collection container holds up to 5 ounces of breast milk, and there is a lid for easy storage. The Fit has the same anti-backflow protection that all of Zomee pumps are designed with, preventing leaks and ensuring that every drop of milk pumped is not wasted. Pumping hands free never felt so good! With the Zomee Fit, you can enjoy pumping anytime and anywhere.

Features

• Leak Proof
• 9 Levels Expression
• Noise level- ≤48dB
• 2+ Hours Battery Life
• BPA + Phthalate Free
• 9 Levels of Stimulation
• Anti-Backflow System
• Hospital Grade Strength
• Easy to Clean and Assemble
• Reaches 260MMHG- 26~ 100CPM
• Memory Function (Remembers the last setting)
• 2 Mins Auto-Switch from Stimulation to Expression
• Display LED Screen (display of mode, battery status & levels)
• Soft Liquid Silicone Breast Shield- sizes 17/21/25MM in the box
• Auto LED Screen Lock (After 30 seconds, the screen goes off automatically)
• 9 Levels 2-Phase Mode (mimics the way baby feeds from mom giving mom extra stimulation for quicker let down)

What's included

• Seal Rings (4)
• Diaphragms (2)
• Pump Motors (2)
• Bra Adjusters (2)
• Duckbill Valves (4)
• Nipple Ruler + Guide
• USB-C Charging Cable
• 25mm Breast Shields (2)
• Breast Shield Bodies (2)
• English + Spanish Manual
• Collection Container Brush
• 150ml Collection Containers & Lids (2)
• Breast Shield Inserts - (2) 17mm, (2) 21mm

Easy to Use

Fit Care Routine

• A regular wash routine is essential for a healthy and safe pumping experience. In order to maintain the performance of your Fit parts, we recommend handwashing parts.
• Make sure the diaphragm is lying flat into the breast shield body and the lip of the edges are secure.
• Take care in inserting and removing the delicate duckbill valves to prevent tears.
• Secure the breast shield kit into the motor until it snaps into place (a “click” will be felt/heard).

Fit Washing:

• Remember that frequent sterilization can cause your pump parts to deteriorate faster. If you follow a regular wash routine, you shouldn’t need to sterilize more than just once.
• The best method for the initial sterilization of pump parts is with boiling water. Fill your pot with enough water to cover and fully saturate the parts. Place on a stovetop and bring to a boil for 5 minutes, and then remove from heat. Allow to cool to a manageable temperature, and then carefully remove parts to let dry.
• All Zomee breast shields, bottles (collection containers), and other hard plastic accessories are BPS-Free and can go through the dishwasher without worry of harmful residue. Do not wash silicone parts like duckbill valves, membranes, and diaphragms in the dishwasher. These parts are delicate and should be hand-washed whenever possible.

Fit Wearable Pump:

• Align the nipple with the center of the breast shield tunnel. Lean forward and guide the assembled wearable to a centered position on your breast.
• Lubricate the breast shield with breast milk, lanolin cream, or olive oil. This layer can help adhere the Fit silicone breast shield more securely to the breast, providing a confident seal.
• Pause your pumping session to empty the collection container(s) before full to avoid unwanted leaks. The Fit does not have a sensor, so keeping a watchful eye on the milk level will avoid leaks.

FAQ

What makes the Fit different from the Z2

The Fit is like wearing a Z2 inside your bra. The same high-quality, hospital-grade strength and anti-backflow protection you get from your Zomee breast pump is also part of the Fit design

How do I get similar suction on my Fit as the Z2?

Nipple placement is everything - when pumping it is essential to mimic the deep latch when breastfeeding. To achieve this, lean forward and align the breast shield to the direction of your nipples when you are putting on your Fit. Make sure there is a proper seal around the nipple, and it feels secure.

Do I need a special bra for the Fit?

Wearing a supportive tight bra will ensure that your pumping sessions are comfortable and effective. Every bra has a different level of support, therefore make sure to get the compression right before each session. If you are using a more structured bra, try using the Bra Adjuster (included with your pump) to create more room.

Will the Fit be the right size for me?

Knowing the correct breast shield size makes pumping more comfortable and efficient. Use the nipple ruler that was included with your Zomee Fit, to determine your flange size. Each pump comes with a 25mm liquid soft silicone breast shield and pairs of both 17mm and 21mm breast shield inserts.

Does the Fit have different pumping modes?

Like the Z2, the Fit has 9 levels of Stimulation mode, 9 levels of Expression mode, and 9 levels of 2-phase mode. When you turn on your wearable pump for the first time, it will automatically enter level 1 of Stimulation mode. The pump will automatically switch to Expression mode after 2 minutes of pumping. You can also manually press the mode button to enter Expression mode if your milk starts to flow earlier.

How do I prevent leaking when using the Fit?

Check that the breast shield body is pushed all the way into the pump, making sure this is the last step when assembling your parts. It is also essential that the correct shield size is being used - if you are using the wrong flange or insert size, your breast may not lay securely against the flange and leaks may occur.

How to charge before the first use

Before using your Fit for the first time, charge the pump unit for at least 2 hours. The battery icon will appear fully charged on the screen when done. Use the provided USB charging cable along with a certified 5V/2A power adapter to charge the pump. Please do not charge both pumps using the same AC wall adapter, as this may interfere with being able to charge your pump.

How do I properly charge my Fit for everyday use?

When low power is indicated (the last battery icon flickers), the pump will shut off after 10 seconds. Recharge your pump immediately, in order to improve the lifecycle of the battery.

How to store the Fit for an extended period of time

Fully recharge the battery before storing the pump for an extended period of time. To maintain the battery performance, recharge the pump every 3 months. Make sure to store the pump in a cool, dry place, avoiding areas of high humidity (like bathrooms and basements). Always avoid direct sunlight.

Battery recommendations

Your breast pump is just like any other electronic device, and if you find no icons on the display, it's possible the battery is going through a wake-up period which might last for 15-20 minutes. This is especially true when using for the first time or recharging after long-term storage. However, if after 20 minutes the non-display continues, please disconnect the power and contact customer support for help.

Do's and Dont's

• Make sure to empty or switch out the collection container when it becomes 2/3 full to prevent spill when transferring milk.
• Check that your breast shield is positioned upright with the shield measurement on top.
• When attaching the collection container to the breast shield body, be careful not to twist too hard to prevent the seal ring from moving.

• The product warranty is applicable as per the terms and conditions provided by the product manufacturer.

Please call us for specific details.

• No returns will be accepted after 30 days from the date of shipment.
• All returns are subject to a restocking fee as per manufacturers terms and conditions.
• All returns must have an RGA number (Returned Goods Authorization), unauthorized returns will not be accepted.
• We do not guarantee fulfillment of any desired purpose or product suitability to the user and this will not be considered as a valid reason for return.
• The products must be new, unused condition, not tampered with, in original packaging and returned at the customers expense in the original packaging.
• If your return is not due to any manufacturing defect then the original shipping cost will be deducted from the total refund.
• Hygiene, bath and toilet items cannot be returned once opened or used.
• Standard manufacturer terms and conditions apply for return policy of this product.

Please call us for specific details.